PEX
Alu PEX 25 mm od is used to supply the manifolds.
The manifold can have isolation valves either at inlets or outlets.
It is also ideal for gas supply from gas meter to boiler.
PEXAPIPE 2000 System Details
Crimp Fittings for the Multilayer and PEXc Pipes
|
|
PEX
Alu PEX 25 mm od is used to supply the manifolds.
The manifold can have isolation valves either at inlets or outlets.
It is also ideal for gas supply from gas meter to boiler. |
|
|
Crimp
or press fittings give peace of mind and speed. The metal sleeve replaces
nut and split ring of compression fittings. It presses on two 'O' ring very
tightly to ensure leak-free joint. |
|
ML
(PEX Alu PEX) Press Fittings Range
A
good range of quality brass press fittings is available from stock for next
day delivery.
All types of fittings in standard sizes (elbows, T's, manifolds and couplers)
ensure quick and easy connection to any outlet, valve or appliance.
| Couplers - Straight | Couplers - Conversion | |
 |
PEX 16 to 10 & 15mm Copper |
- Compression PEX 16 to 15mm PEX 25 to 22mm |
| Elbows | Elbows - conversions | |
 |
Single wall plate elbow PEX 16 to 1/2" F PEX 25, to PEX 25 elbow PEX 32, to PEX 32 elbow |
PEX 16 to 1/2" M or F PEX 25 to 3/4" M or F PEX 32 to 1" M or F
|
| Tees | Tees - conversions | |
 |
All PEX 16 mm Tee All PEX 25 mm Tee All PEX 32 mm Tee |
PEX 16 to 1/2" F PEX 25 to 3/4" F PEX 32 to 1" F |
|
All other accessories and fittings can be used with the crimp system. Such as angle valves, UFH and H&C manifolds & pipe brackets, reducers, caps and plugs, ball valves, etc. |
||
How to make connection using crimp (or press) fittings.
 |
Step 1 Cut ML pipe with pipe cutters avoiding burr which can damage 'O' rings.. |
 |
Step 2 Use reamer to widen pipe to fit over fitting insert.. |
 |
Step 3 Slide sleeve over pipe and fitting. |
|
|
Step 4 Crimp until stop is reached. That's it. You now have a very strong connection. |
