How to Use Quickframe
Your design, your comfort with Quickframe
Boxing or Curtain Walling
Whether you are boxing service pipes in the bathroom or building a partition wall between say two bathroom, the amount of Quickframe material you require is quite easy to work out.
You need a vertical or horizontal tube every metre or where there are appliances to fit. Examine partition unit and spacer box ing unit sketches below.
Decide on the wall where all the services and sanitary are going to be situated. Sketch the Quickframe structure. Estimate material required, including WC and basin module. Cut profile to size using angle grinder with steel cutting wheel or hacksaw. Fit profiles to wall using wall clamps and then attach modules and more profile using corner joints..
Quickframe components are standardised in a way to reduce the different components required to a minimum. These diagrams and the table below will help you to arrive at a desired design for your bathroom.
Bath Mounting
When it comes to fitting a bath tub Quickframe allows you the accuracy and the strength you always desired. No more timber that can get wet or out of line. No more sagging bath tubs or leak from disconnected waste pipe.
Support details
The New Quickframe Concealed WC cistern

WC Modules - A variety of installations
The WC cistern can be installed anywhere
One cistern for low or high installation and for front or top flushing. Thus reducing the spare parts required.

Saving water with the dual flush system
The cistern is designed to flush with 3 or 6 litres. If dispersal of waste is problematic, the water quantity flushed can be increases to 9 litres.The graphics clearly demonstrate how much water a 4-person household can potentially save in one year based on 5 flushings – 4 small and one large - per person each day.


There is a WC module for solid walls as well as for the Quickframe structure
 

Sealed cistern
The cistern is pressure-tested at the factory. The water connection can be made without having to open the sealed inspection flap. An unbroken seal is a sign that the cistern is clean and ready to be filled. No dirt has entered the cistern during trhe first fix installation. A common problem!

Just how the plumber likes it!
 The design of the lever mechanism allows the plumber easy access to the interior of the cistern. The filling hose can be fitted without the need for tools and the discharge and fill valves can be dismantled separately from each another.


You can place the standard WC module in a corner to save space.

Cistern Cut-out
Many advantages:

1- Sealed inspection flap
2- Robust lever mechanism
3- Impac resistant high-density PE blow-moulded tank
4- Compatible spare parts
5- Powerful flush from high level water
Ambia Design. New Flush plates with 2-buttons - short and full flush .
Available in antibacteria white, brushed chrome and chrome colours.

Click to see WC cistern details and assembly instructions
 

Note: Acorbat reader 4 must be installed on your computer. Changes or upgrades to product can take place without notice.