'Warmth all year round in our conservatory.  Thanks to Pexatherm UFH, it's our most used living space.' Mr. Fisher of Manchester.

PEXATHERM UFH Systems – Conservatories Packages

IPPEC has been offering Pexatherm underfloor heating conservatories packages for 16 years
Our know how, long experience and extensive investment help you choose the right package.

Read the conservatory article in the magazine - Room with a view.
Small conservatories can be heated with Pexatherrn UFH one circuit system. The water in the floor is supplied from a radiator via low temperature valve. All the necessary fittings are supplied with this new valve from IPPEC. 
Pexatherm Pipe in Staple in a large conservatory fed from the house UFH manifold. The PIS system lets you place pipes close to each other and thus lay a high pipe density. The system is ideal for conservatories with glazed roofs and high heat loss. 
Installing Pexatherm UFH in conservatories added to an existing centraly heated properties.

IPPEC supplies a wide range of Pexatherm products and systems to suit all types of conservatories.
1- Conservatories under 10 m2 can be heated via an existing radiator, and using our new adjustable low temperature valve.
2- Conservatories over 12 m2 use our 1-way UFH manifold which connect to the primary flow and return to the boiler and has its own water temp. reduction control and pump.
3- We also supply 2, 3 or 4 way manifolds for larger conservatories with water temp. reduction control.
4- We supply Pexatherm pipe-in-rail system for conservatories with tiled roofs and pipe-in-staple for glazed roofs.
5- Conservatories with limited floor height will benefit from the Pexatherm panel module system to give very high heat output or Pexatherm pipe-in-black-plate in a suspended timber floor.
6- New ultra flexible PEX 17 or PEX 16 or PEX alu PEX 16 mm can be used with Pexatherm conservatories package.

Installing Pexatherm UFH in conservatories with UFH heated house.

Conservatories built at the same time as the new property or during major renovation are often heated from the main UFH manifold.
1- Make sure you lay the required amount of pipes in the floor from the UFH manifold to the entrance of conservatory, if you are building the conservatory at a later stage
2- Build a small duct in floor (or even wall) to terminate pipes.
3- IPPEC supplies the couplers that are required to join the pipe in the duct.
4- Pexatherm manifolds can be extended if necessary.
5- Do not forget that you can use larger PEX primary pipe in conduit to supply a new conservatory UFH manifold. This the preferred method for large conservatories.

 The compact UFH manifold can be easily concealed in a cabinet. It can be supplied with PEX or ML primary pipe from the boiler. The mixer and pump can also be at the boiler. 

Please visit our web shop to view the range of conservatories package on special offer or send your plans for a free estimate.