Where
to installing Pexatherm-e UFH package:
In
any small area such as bathroom or conservatory or laying new floor in
kitchen or sitting room.
IPPEC
can supply a wide range of Pexatherm-e electric underfloor heating system.
1- Conservatories
under 30 m2 can be heated with 2 to 4 cable circuits.
2- Bathroom under 12 m2 use 1 or 2 heating cable circuit. Several bathrooms
can be controlled with one MZ 4 control panel.
3- Lower output cable on mat can be used in thinner screed or even in
tile adhesive layer were floor depth is limited.
4- Pexatherm-e could be powered with economy 7 electricity reducing energy
usage and storing the heat in the floor to be released gradually during
the day.
The heart of the Pexatherm-e are the electric mats and cables.
Choosing a suitable Pexatherm-e UFH package.
| Output
of Cables and Mats in Watts |
|||
| Area in m2 | Cable output | Area in m2 | Mat output |
| 2.5 |
270 |
1 |
100 |
| 4.5 |
500 |
2 |
200 |
| 7.5 |
1000 |
3 |
300 |
| 12 |
1600 |
5 |
500 |
| 16 |
1900 |
8 |
800 |
| 20 |
2400 |
10 |
1000 |
| Max. operating temp. 65 Deg.C. Other areas and outputs available. | |||
1- Pexatherm-e can
be installed in kitchens, bathrooms and entrance halls.
2- It ideal around swimming pools, changing rooms and conservatories.
3- Background
heating of tiles, atria and horticultural buildings benefit from Pexatherm-e
UFH.
4- Pexatherm-e is used for snow and ice melting and under cold stores.
5- Many areas in hospital and nursing homes use Pexathrem-e UFH.
The MZ 4 wiring centre has adjustment for outside and floor temperature cutoff for maximum comfort while saving electricity. See details under Pexatherm controls.