Introduction
The Pipe-in-Staple
system is the professionals choice. It is fast to install with maximum
layout flexibility. It is ideal in conservatories as the pipes can be
closely spaced for maximum heat output using the 'snail path pattern'.
System
Design
The Pipe-in-Staple
is the system of choice for solid floors. It is fast to install with maximum
layout flexibility. The Multiboard floor insulation laminates are part
of the system. The staples can be placed by hand or staple tool anywhere
on the insulation. Thus holding the pipe firmly to thefloor insulation.
The connection of manifold, mixer and boiler is the same for all the Pexatherm systems.
The
CAD design
Each Pexatherm system
includes a project dossier. The project dossier is made of pipe layout
drawings, installation instructions, primary schematics, wiring diagram
and fault finding procedures.
System
Components
The system is comprised
of Multiboard laminated floor insulation, edge strip insulation. PEXc
heating pipe with oxygen barrier, pipe fixing staples, underfloor manifold,
mixer, pump and programmer. Individual room thermostat and cement additive
are on the option list.
The Pexatherm pipe-in-staple is widely use for domestic and commercial installations. It is often the preferred system by professional installers.
IPPEC supplies floor insulation in several thickness and different material as well as edge (perimeter) insulation strip for the above systems when used in solid floor.
